Naposledy zobrazené

Nájdi nás na Facebooku

Nájdi nás na Youtube

 

NÁJDETE NÁS AJ NA

NajNákup

Heuréka

Pešia zóna

Slovenská Pošta

 

PREFERUJEME PLATBY

PayPal

Trust Pay


Xtar SP1 rýchlonabíjačka Li-ion/ LiFePO4/ záložný zdroj

Cena 16.90
Cena bez DPH 14.08
DPH 20.00 %
Záručná doba 24 mesiacov
Výrobca XTAR
Kód produktu XTARSP1
Dostupnosť nedostupné

Xtar SP1 rýchlonabíjačka Li-ion/ LiFePO4/ záložný zdroj + 12V kábel do autozapalovača


Xtar SP1 je rýchlonabíjačka od značky Xtar, ktorá dokáže nabíjať rýchlosťou

až 2000 mA, čo z nej robí najrýchlejšiu nabíjačku na jeden Li-ion akumulátor

na trhu! Nabíjačky Xtar používajú najmodernejší procesor, ktorý zaručuje

šetrné nabíjanie a neskracuje životnosť akumulátora. Táto nabíjačka môže

nabíjať akumulátory typu 14500/ 14650/ 17670/ 18500/ 18650/ 18700/

22650/ 25500/ 26650 3.6V/3.7V/ 3.8V Li-ion/ LiFePO. Pred nabíjaním je

potrebné zvoliť bočným spínačom nominálne napätie akumulátora 3.6VLiFePO4,

3.7V a 3.8V Li-ion (každý akumulátor ma na sebe napísanú

nominálnu hodnotu napätia). Nabíjanie je kontrolované mikroprocesorom a

vypína sa automaticky po dobití akumulátoru. Celý proces nabíjania je teplotne

kontrolovaný ak teplota akumulátora presiahne určitú hranicu, tak nabíjačka

automaticky zníži prúd nabíjania. Taktiež veľkou výhodou u SP1 je možnosť

voľby rýchlosti nabíjacieho prúdu a to 500mA, 1000mA alebo 2000mA, ktorý

je možno meniť pomocou tlačidla umiestneného na prednej časti nabíjačky -

(CC). SP1 umožňuje nabíjať aj iné zariadenia pomocou USB portu, na

nabíjačke sa nachádza výstupný USB port (5,0V/ 1.A) do ktorého sa pripája

nabíjané zariadenie (Mobilný telefón, mp3 prehrávač, tablet atď.)

XTAR SP1 Power bank


Parametre:

Jeden nabíjací kanál, nabíjací algoritmus TC/CC/CV.

Metóda nabíjania TC/CC/CV

Nabíjací prúd: 500/1000/2000mA

Ukončenie nabíjania pri napätí akumulátora maximálne na 3,6V/ 4,20V/ 4,35V

(záleži od typu akumulátora).

Podporované akumulátory: 14500/ 14650/ 17670/ 18500/ 18650/ 18700/

22650/ 25500/ 26650 3,6V, 3,7V, 3,8V Li-ion akumulátory

Ochrana proti opačnému vloženiu batérií.

Hmotnosť nabíjačky: 58 gramov.

Rozmery: 118x36x33 milimetrov.

Súčasťou dodávky je nabíjačka, napájací zdroj 110-240VAC.


Nabíjanie:

Prevádzková teplota 0 ~ 40

Vstupné napätie/ prúd: AC 12V DC / 2000 mA

Výstupný prúd (nabíjací prúd): CC 500mA ± 5%

Výstupný prúd (nabíjací prúd): CC 1000mA ± 5%

Výstupný prúd (nabíjací prúd): CC 2000mA ± 5%

Vypínacie napätie nabíjania: 3,6/ 4,2/ 4,35 ± 0.05V




Ovládanie:

Napájací adaptér (zdroj) pripojíme do nabíjačky a následné ho pripojíme k sieti

110/220V. Kontrolky nabíjacej šachty sa rozsvieti na zeleno a signalizácia

rýchlosti nabíjania sa rozsvieti na modro na hodnote 0,5A, rýchlosť je možne

zmeniť stlačením tlačidla (CC) umiestneného pod signalizáciou LED rýchlosti

nabíjania (modrá LED). Pred vložením akumulátora je potrebné zvoliť bočným

spínačom nominálne napätie akumulátora - 3.2V- LiFePO4, 3.6V a 3.8V Li-ion

(každý akumulátor ma na sebe napísanú nominálnu hodnotu

napätia). Akumulátor vkladajte podľa polarity tak ako je znázornená v

nabíjacej šachte. Po vložení akumulátora sa signalizačná farba LED zmení zo

zelenej na červenú. Po plnom nabití akumulátora sa signalizačná farba LED

zmení z červenej na zelenú.

Nabíjanie iných zariadení pomocou USB:

Akumulátor v nabíjačke musí byť plne nabitý. Po pripojení zariadenia do USB

portu nabíjačky sa rozsvieti zelená LED, ak kapacita akumulátora klesne pod

50% signalizácia sa zmení na červenú LED, ak klesne kapacita akumulátora

pod 25% signalizačná červená LED sa rozbliká, nabíjanie cez USB sa ukončí




 

Review of Charger Xtar SP1Charger Xtar SP1

DSC_4680
DSC_4681 DSC_4682

Xtar makes many good chargers, this one is a single channel charger with 3 currents, 3 voltages and able to handle batteries up to 26650 size. This makes it useable for most LiIon batteries on the market, except the smaller ones.
It does also have a usb output, making it possible to charge a phone or other usb equipment from it.

DSC_4675 DSC_4677 DSC_4678

The charger comes in a cardboard box with lots of specifications and batteries sizes listed on it.

DSC_4679

In the box is the charger, a power supply, a car adapter, a warranty card and a manual.

DSC_4683

The charger has a switch that can select between 3 voltages, the marked voltages are supposed to be battery nominal voltages. It is very important to select the correct voltage, before starting a charge (See table below).
The actual selection is also shown on the 3 blue leds on top of the charger, before it starts charging and if the switch is moved during charging.

DSC_4686

On top of the charger is 4 leds and a button:
3 blue to show selected current and voltage.
1 red/green led.
The button is used to select charge current.

Without a battery in the charger the led for the selected voltage will flash. With a battery in the charger the led for the voltage will flash 3 times, if the voltage is changed.
While charging the led for the selected current will be steadily lit.
The button will step between the 3 current each time it is pressed. Without a battery in the charger the led for the current will be stable lit for a short time, before returning to the flashing voltage display. When charging the next led will just turn on.

It is easy to use, just be aware that the current selection button always is active.
I am not that happy with the markings, they are difficult to read, but when you know the charger they are easy to guess.

The red/green led is red while charging, green at other times, except when using usb output there it is used to signal charge state.

DSC_4684

The charger has a 12 volt input and a usb output.

DSC_4685

The label with a hidden code to prevent fake chargers is also present.

DSC_4688 DSC_4689

The charger can handle 33 mm to 72 mm long batteries both flat and button top. The slider works fine.


supportedBatteryTypes

supportedBatterySizes DSC_4690 DSC_4691 DSC_4692 DSC_4693 DSC_4694 DSC_4695 DSC_4696

The charger can easily handle 70 mm long batteries including flat top cells.
The charge current is to high for 10440 batteries, except for IMR types.



Measurements
  • When turned on the selected voltage will flash a couple of times.
  • Below 2 volt the charger will charge with 1.5 to 2 mA, this is independent of selected charge voltage.
  • Between 2 and 2.9 volt the charger charges with about 60 mA, this is independent of selected charge voltage.
  • Above 2.9 volt regular charge current is applied (See curves below).
  • LiFePO4 (3.2V setting) will restart charging when voltage drops to 3.3 volt.
  • LiCoO2 (3.6V & 3.8V setting) will restart charging when voltage drops to 3.9 volt.
  • The charger will restart charging when power is cycled or battery reinserted.
  • When charger is disconnected from power, with a battery in, it will draw up to 9mA from the battery (This is a bit high).
  • When charger is connected to power and the main charge is finished, it will charge with 0.3mA for 3.6V & 3.8V setting and 0.7mA for 3.2V setting.


3.6V setting LiCoO2, i.e. 4.2 volt charging voltage

Xtar%20SP1%200.5A%20(PA18650-31)

The 0.5A charge is a very good CC/CV charge with a termination current about 65mA.

Xtar%20SP1%200.5A%20(AW16340-IMR)

Even my old 16340 cell is handed perfect.

Xtar%20SP1%200.5A%20(AW18350-IMR)

Xtar%20SP1%200.5A%20(KP14500-08)

Other small cells .

Xtar%20SP1%201A%20(PA18650-31)

The 1A charge is also a very good CC/CV charge with a termination current about 70mA.


Xtar%20SP1%201A%20(BE18650-26)
Xtar%20SP1%201A%20(PA18650-34)

Charge time varies with cell capacity (As usual).

Xtar%20SP1%201A%20(AW16340-IMR)

Using 1A on this old cell also works fine.

Xtar%20SP1%201A%20(AW18350-IMR)

Same with this cell.

Xtar%20SP1%202A%20(PA18650-31)


The 2A charge follows the 0.5A and 1A curves in being a very good CC/CV charge, the termination current is about 95mA. The voltage curve is slight more rounded, due to resistance in the charger and the temperature is higher, due to the higher current.

Xtar%20SP1%201A%2012V%20(PA18650-31)

Using an external 12 volt supply show that the charger need about 500mA on 12 volt to deliver 1A to the battery.

Temperature1A1

M1: 34,4°C, M2: 38,7°C, M3: 37,1°C, M4: 25,8°C, HS1: 44,8°C

Temperature1A2

M1: 33,6°C, M2: 42,1°C, HS1: 43,7°C

Temperature2A1

M1: 44,7°C, M2: 46,4°C, M3: 42,9°C, M4: 29,3°C, HS1: 62,0°C

Temperature2A2

M1: 52,8°C, M2: 46,3°C, HS1: 61,2°C

At 2A the charger get rather warm. This could have been better, but is probably very difficult do improve without a fan or a larger box.
Some of the heat in the battery is probably the battery heating due to the 2A charge current.



3.8V setting LiCoO2, i.e. 4.35 volt charging voltage

There is only a few of these batteries on the market. The higher voltage is an advantage in many single cell flashlights.

Xtar%20SP1%201A%20(LG18650-30)

The charger does a perfect CC/CV charge curve. The 4.35 volt is slightly low on my copy of the charger (It is within allowable tolerances), but this also means the voltage is within tolerances to charge a 4.30 volt cell.
Before using the charger for a 4.30 volt cell I will strongly advice to check the charge voltage with a DMM: Connect a DMM parallel to the battery and check that the voltage stays below 4.35 volt all the time while charging



3.2V setting LiFePO4, i.e. 3.6 volt charging voltage

These batteries has lower capacity and lower voltage than LiCoO2 batteries, but the chemistry is safer and the batteries can often deliver large currents.
This setting is also used for LiIon batteries marked 3 volt (See my article about rechargeable CR123 batteries).

Xtar%20SP1%200.5A%20(14500-LiFePO4)

Nice CC/CV charge curve.

Xtar%20SP1%201A%20(18650-LiFePO4)

This battery started at a lower voltage and the charger uses a low current to increase the voltage. At 2.9 volt regular charge current will be used.

poweron

The charger needs about 4 seconds to start up.

currentselection

Current selection will increase current slowly and drop current fast.

voltagechange

Voltage change will stop charging and the slowly turn up the current again to the selected level.





Measurements on usb power
  • The usb output cannot be activated when 12V is supplied to the charger.
  • Usb output does not turn on or off automatically, but requires a button press for both.
  • With usb output activated the charge will draw up to 35mA from the battery.
  • It will draw up to 9mA from the battery when off, i.e. do not leave it with a battery in for weeks.
  • At 3.5 volt the usb led will change from green to red, if the voltage raises again it will stay red.
  • At 3.17 volt the usb led will start flashing red, if the voltage raises again it will continue flashing.
  • When the usb output is turned off due to low battery it cannot be turned on again, before the battery has been replaced.
  • Output is coded as Apple 1A.


XTAR%20SP1%20load%20sweep

The usb output is rated at 1A, but can deliver much more. I would have preferred a overload cutout.
The output is limited to about 11W, but that is more than twice the rated current.

Xtar%20SP1%20out%205ohm%20(PA18650-31)

Output at 1A looks very nice and with good efficiency.

Xtar%20SP1%20out%2010ohm%20(BE18650-26)
Xtar%20SP1%20out%2010ohm%20(PA18650-31)
Xtar%20SP1%20out%2010ohm%20(PA18650-34)

At 0.5A the efficiency is even higher.

Xtar%20SP1%20out%2010ohm%20(LG18650-30)

I did also try with a 4.35 volt cell.

5ohm

The usb output has very low noise, even at maximum load (9mV rms).

10ohm

Reducing the load will also reduce the noise, at 0.5A it is down to 7mV rms.


Testing with 2500 volt and 5000 volt between mains and low volt side on power supply, did not show any safety problems.



Conclusion

This charger is a very good charger, it always uses a good CC/CV charging and can handle most LiIon battery sizes and types.
The usb output does also works fine, except the missing over load protection and like all chargers with usb output you must remove the battery when not using the usb output (Within a few days).

Could I wish for more in this charger? The answer is yes, I would have liked a 0.25A setting and maybe even a 0.1A setting. I would also have preferred that the voltage switch was on top of the charger where it is more visible (The led indication does help).



Notes

The charger was supplied by XTAR for a review.

Here is an explanation on how I did the above charge curves: How do I test a charger
Vaše meno:


Váš e-mail:   


Váš telefón:   


Správa:   


Opíšte bezpečnostný kód:   
nový kód