Naposledy zobrazené

Nájdi nás na Facebooku

Nájdi nás na Youtube

 

NÁJDETE NÁS AJ NA

NajNákup

Heuréka

Pešia zóna

Slovenská Pošta

 

PREFERUJEME PLATBY

PayPal

Trust Pay


OPUS BT-C100 s LCD Displejom a analyzérom

NOVINKA
Cena 17.90
Cena bez DPH 14.92
DPH 20.00 %
Záručná doba 24 mesiacov
Výrobca Opus
Kód produktu CHA-OPUS-BT-C100
Dostupnosť na sklade
KS

OPUS BT-C100 s LCD Displejom a analyzérom

Kompaktná, ale napriek tomu profesionálna nabíjačka s analytickými funkciami. S množstvom malých vylepšení v porovnaní s jeho veľkým bratom BT-C3100 prináša Opus BT-C100 ako nabíjačka one-bay výhodnú metódu pre prepínanie jednotlivých typov batérií priamo pomocou tlačidiel na nabíjačke. Podporované sú LiIon 4.20, 4.35 LiIon, LiFePO4 a NiMH / NiCd akumulátory. 

LCD Displej
Displej zobrazuje napätie batérie, nabíjací prúd, vnútorný odpor, stav nabitia alebo vybitia  a práve uplynulý čas nabíjania. Stav na displeji je priebežne aktualizovaný, a to aj po nabití a ukazuje tak kedykoľvek aktuálne napätie.

Rôzne programy na starostlivosť a analýzu batérií:
nabíjanie, vybíjanie, obnovovací program NiMH / NiCd článkov, meranie kapacity, rýchly test kapacity,

Typy batérií Li-Ion ktoré možno nabíjať s nabíjačkou Opus BT-C100:

10440/14500/14650/16340 / 16650/17500/17650/17670/18350/18490/18500/18650/18700/26500/26650/32650
ako Li-Ion batéria IMR, INR a ICR (nominálne 3.6V-3.7V) na 4.20V
ako LiIon batériou (nominálne 3,85V) až 4.35V
ako LiFePO4 batérie (3.2V nominálne) až 3,7

Typy akumulátorov NiMH / NiCd ktoré možno nabíjať pomocou nabíjačky Opus BT-C100:

  • AAA
  • AA
  • C
  • D

Informácie o výrobku:

  • 1 nabíjaci slot
  • Podporuje LiIon 4,20, Li-Ion 4,35, LiFePO4, NiMH a NiCd akumulátory
  • LCD displej zobrazujúci aktuálne napätie akumulátora, kapacitu a nabíjací prúd
  • Voliteľnosť nabíjacieho prúdu od 0,2A do 1.6a (LiIon) alebo 2.0A (NiMH / NiCd)
  • Možnosť vybitia voliteľná od 0,1A až 0.6A (Li-Ion) alebo 1A (NiMH / NiCd)
  • Analýza Batérie: zmerá vnútorný odpor, meranie kapacity pri vykládke a nakládke
  • Údržba batérie: Program Refresh pre NiMH a NiCd akumulátory
  • Opravná funkcie hlboko vybitej batérie
  • Vkladanie pripojeného mobilného telefónu USB až 1A a pracuje s nakladanú lítium-iónové batérie ako zdroj napájania USB OTG (5V, 2.4A)
  • Napájanie pomocou dodávaného 12V / 1A napájania. Alternatívne cez MicroUSB kábel (5V, 2A) alebo auto nabíjačkou (voliteľné príslušenstvo)
  • Nízka teplota, sledovanie teploty, skrat a prepólovanie

Obsah balenia:

Nabíjačka OPUS, napájací zdroj, nemecký Návod na používanie

 

 

Review of Charger Opus BT-C100Charger Opus BT-C100

DSC_4369

DSC_4373 DSC_4372

This is a supplementary review to the original BT-C100 review, please read it first.

DSC_4365 DSC_4366

This time the retail box was ready and I got the EU version.

DSC_4368

The box included EU power supply with universal voltage , manual and the charger.

DSC_4374

I forgot to show the markings on the charger in the last review.

The user interface is improved:
When a battery is put into the charger it will shortly show the voltage (Maybe a bit too shortly) and then change to show the selected current.
It looks like the voltage display is fairly accurate now when working as a power bank.

The charger still looks like it is connected to power when a LiIon battery is put into it and you can select modes and current. The settings do not work, before the charger is connected to power. This can confuse the maximum current setting in the charger, i.e. you cannot select the currents that are supposed to be aviable.
Except for the confusion it is not really a problem, just connect power before putting the battery in.



Measurements

I am not going to do all the tests again, only a few spot tests and some supplementary tests.
This time I did not break the usb connector and did some test with usb powered charging.



LiIon charging

Opus%20BT-C100%20charge%201A%20(PA18650-31)

Charging looks the same as the first one I tested.

Opus%20BT-C100%20charge%201.6A%20(PA18650-31)

Highest LiIon charge current is 1.6A with a 12V power supply.

Opus%20BT-C100%20charge%201.3A%205V%20(PA18650-31)

With usb power supply the maximum LiIon current is 1.3A and as can be seen it cannot maintain the current until the CV phase (This is very common for usb powered chargers).
The charging is just as good as with 12V power supply, but will be a bit slower.

Opus%20BT-C100%20charge%201.3A%205V%200.5ohm%20(PA18650-31)

Simulating a long usb cable or weak usb power supply did slow the charging down, but the battery is charged.



LiFePO4 3.6 volt charging

Opus%20BT-C100%20charge%200.5A%20(SO14500-LiFePO4)

The LiFePO4 charging has not been improved, it will restart a couple of times, due to the voltage drop.



NiMH charging

Opus%20BT-C100%20charge%200.2A%20(eneloop)

The charger do not miss termination at low current.

Opus%20BT-C100%20charge%202A%205V%20(eneloop)

A high current charger from usb power also works fine, but for some reason the charger reduces current during the charge (It might be due to temperature).



USB output (power bank) function

I run the usual load tests and it looks about the same.

Opus%20BT-C100%20usb%20out%205ohm%20(PA18650-31)

Opus%20BT-C100%20usb%20out%202.5ohm%20(PA18650-31)

The problems at 2A is still present. Instead of these oscillations it would have been better to turn the usb output off.



Conclusion

I did not expect many changes from the early version of the charger and I did not find many.
I like the slightly improved user interface where it displays voltage and then selected current.
But it looks like the final LiIon voltage is rather low, I hope it is only present on my copy of the charger (0.05V more would have been nice).




Notes

The charger was supplied by Gearbest for review.

Here is an explanation on how I did the above charge curves: How do I test a charger
Vaše meno:


Váš e-mail:   


Váš telefón:   


Správa:   


Opíšte bezpečnostný kód:   
nový kód